Revit plugin for electricians In pilot

Pembris Electrical

Pembris Electrical takes on the repetitive drawing work in Revit and leaves the engineering judgement to you. Every change is presented before it is made, and can be reversed in one step.

Try it for 30 days

For Revit 2025 and 2026.

How a route is placed

You choose what to connect. Pembris Electrical finds the way, handles the bends and checks the result against the model.

  1. Pick a start and an end

    Click two devices, or two open conduit ends. If you selected them beforehand, it starts at once.

  2. Assess the proposal

    The route is drawn as real conduit in the model, with its length, bends and size. You see every element it passes through, and whether each end is joined.

  3. Accept, or leave it

    Add it, and the route becomes one undo step. Cancel, and the model is exactly as it was. If a route is refused, you are offered what could be changed.

The tools

Eight tools on their own tab in Revit, in three groups. Choose a tool to see it at work.

Conduit routes

From one route to a whole floor, around whatever stands in the way.

  • Select two devices, and Pembris Electrical calculates the route with bends, clear of everything set to Avoid. You assess the proposal, and everything it crosses, before you accept.

    • Up to three proposals, compared on length, bends and height
    • 25 mm clearance around obstacles by default
    • Ctrl+Enter adds the route and continues from its last end
    Documentation for Route A to B
  • Connect an entire selection of devices in a single operation, as a chain or a tree. A whole circuit, with its board, is added in one click.

    • You choose where the chain starts
    • Up to 50 devices in one operation
    • If not every link succeeds, you see which pairs are missing before you add the rest
    Documentation for Connect devices
  • Each selected device receives its own route to the nearest cable tray, or to one you designate. In rigid or flexible conduit.

    • Reads cable trays in the model and in links, sloped and vertical ones too
    • Flexible ABB Adaptaflex SN20–SN32, with Cablofil clamps if you want them
    • The cable tray itself is never changed
    Documentation for Drop to cable tray
  • Define areas the routes should prefer, stay within or keep out of. The zones are stored in the model, and new routes always respect the areas you have closed off.

    • Prefer, Stay inside or Keep out
    • Drawn in a plan or in 3D, or entered in millimetres
    • By default, routes prefer the space above the ceiling
    Documentation for Zones

Devices and circuits

Place the devices, and take the circuit schedule from the same model.

  • The devices you've used before, gathered one click away: from this project, your other projects or a colleague. The cursor snaps to walls, ceilings and floors.

    • Snaps to empty boxes, heights used nearby and even spacing
    • In plans, ceiling plans, sections, elevations and 3D
    • Up to six favourites on the keys 1–6
    Documentation for Place devices
  • A consolidated view of boards and circuits, with the longest cable length per circuit. Label the circuits on the drawing, and export the circuit schedule to Excel, CSV or PDF.

    • The length follows conduit and cable trays, risers included
    • Estimated lengths are marked ~, unknown ones ?
    • A PDF circuit schedule, A4 landscape, for one board or all of them
    Documentation for Circuits and circuit schedule

Materials and checks

What needs ordering, and what needs fixing before the model is issued.

  • Quantities taken directly from the model, including anything you've drawn yourself. Assign EL numbers to the types, and export the order list to Excel or CSV.

    • Counts, cables and the order in one window, with what needs a look at the top
    • A seven-digit EL number or your own code, kept in the project or on your PC
    • An unknown quantity is never written as zero
    Documentation for Material list
  • Uncover clashes, excessive bends, missing fittings and loose ends before the model is issued. The check also covers conduit you drew yourself, and routes from Pembris Electrical can be re-routed directly from there.

    • Clashes, too little clearance, missing fittings and too many bends
    • Conduit drawn by others is checked, but never changed
    • Check the whole project, and copy the list into a spreadsheet
    Documentation for Check the routes

What the routes take into account

Every category in the model is either something a route may pass through or something it keeps clear of. These are the defaults, and you can change them.

Passes through

  • Beams
  • Walls
  • Ceilings

Keeps clear of

  • Columns
  • Foundations
  • Floors
  • Roofs
  • Stairs
  • Ducts
  • Pipes
  • Sprinklers
  • Cable trays
  • Conduit
  • Equipment and devices
  • Plumbing fixtures
  • Doors
  • Windows and curtain panels
  • The real geometry

    Before you accept, the conduit and fittings are checked against the actual shape of the elements. A route that overlaps anything set to Avoid is discarded.

  • Linked models

    Read as they sit in the project, rotated and mirrored ones too, and never changed. If a link is missing, routing stops until you reload it or choose to ignore it.

  • Bends

    Bends are added up per run, with 360° as the default limit. The straight runs beside each bend follow the size of the project’s own elbows.

  • Your own rules

    Up to 200 rules by category, family or type, picked straight from the model. The most specific rule wins.

Facts

Revit
2025 and 2026
Language
English. The circuit schedule can also be made in Norwegian.
Undo
Every command is added as one undo step.
Export
Excel, CSV and PDF.
Offline
The pilot needs no internet. The licensed version works for up to 60 days without a connection.
Data
Never the names of models, projects, files or users.
Settings
The project’s settings are saved in the model and reach colleagues when they sync.
Help
F1 on a button opens the help for exactly that one, offline too. The same help is on support.pembris.no.

Questions and answers

The pilot has a fixed end date. After that, the tools are removed from Revit, while your models remain unchanged and everything you've added is preserved. Should you choose to continue, the licensed version is installed over the pilot as an ordinary update.

The pilot requires no internet connection. The licensed version is activated online once, or with a licence file if the PC is offline, and then operates for up to 60 days without a connection. How to activate the licence.

Never the names of models, projects, files, users or machines. The licence transmits only what's necessary for activation and updates. Usage statistics are shared only if you enable them, and sanitised error reports help us resolve faults. Read more about usage statistics and error reports.

Revit 2025 and 2026. Older versions aren't supported for now. See the system requirements and what works in each version.

English.

Press F1 on a button in Revit for the help on exactly that one, or look it up on support.pembris.no. You can also write to kontakt@pembris.no, and the people who make it will answer.

Documentation and help

The user guide is on support.pembris.no, in English like the plugin. Every feature is described there in detail.

Go to support.pembris.no
  • Getting started

    Install Pembris Electrical, activate your licence and route your first conduit.

  • The features

    Every command, what it supports today, and where to find it.

  • Compatibility

    What works in Revit 2025 and 2026, with linked models, MagiCAD content and conduit drawn by hand.

  • Troubleshooting

    Slow searches, low memory, unloaded links, and how to collect diagnostics.

Try Pembris Electrical for 30 days

For electricians and electrical designers who draw in Revit. Your company can test Pembris Electrical with one or two users for 30 days, on your own projects. Afterwards, you decide if it fits.

  1. Get in touch

    Write to us, and the people who make Pembris Electrical will answer.

  2. 30 days on your own projects

    One or two users test it on real projects, in direct contact with us throughout.

  3. A fixed end date

    Then the tools are removed from Revit. Your models are unchanged, and everything you added stays.

  4. You decide

    Should you continue, the licensed version is installed over the pilot as an ordinary update.

In pilot means that Pembris Electrical is already in use with its first customers, ahead of the full launch.

30 days · 1–2 users · Revit 2025 and 2026

Considering a pilot?

Get in touch