News

The longest cable run, circuit by circuit

A circuit schedule stays with a building for years. It hangs in the panel and shows which circuits run where, with their protection and cable type. One figure in it is harder to get right than the rest: how long the longest cable in each circuit is.

Why the length matters

Cable length is an input to the voltage-drop calculation and to the check that the protective device disconnects fast enough in the event of a fault. Together with load, cross-section and protection, it decides whether the circuit holds, and the longest cable is the one with the least margin.

Measured by hand on the drawing, the length is wrong as soon as the routes change.

longest cable in the circuitU1Circuit 1Circuit 2Circuit 3
Three circuits from panel U1. The longest cable run in each circuit is marked in orange. In circuit 3 it runs to the device nearest the panel, because the route there takes a detour.

The figure shows a detail that makes the number easy to get wrong: the longest cable does not necessarily run to the device furthest away. The route decides the length, not the straight line.

Taken from the model

Pembris Electrical gathers the panels and circuits in one overview, with the longest cable run for each circuit. The lengths are calculated from the routes in the model. From the overview you label the circuits on the drawing and export the circuit schedule to Excel, CSV or PDF.

An animation of the circuit overview: panel U1 with the longest cable run per circuit, the circuits labelled on the drawing and the circuit schedule exported as PDF.

The tool does not make the judgement for you. Whether the voltage drop is acceptable, and which protective device and conductor cross-section to use, remain your professional decisions. The difference is that they rest on a figure that matches the model.

Circuits and the circuit schedule are among the features of Pembris Electrical, now in pilot with its first customers. Read more about Pembris Electrical.